GARAGE SALE REVISED

pure fury · Joined: 16 Dec 2007 Posts: 172

gary williams streched carb with sheetmetal plate $1250
MANY RATIOS OF PROFAB GEARS CALL
richmond dana 60 gears 5.38 -1 $100
2- pro stock cams & 1- nitros cam all roller $200
9 INCH FORD FRONT END 3.50 GEARS 13 PASSES ON FRONT END- DANA 44 OUTERS , MOSER AXELS,3RD MEMBER FROM RANDYS RING AND PINION HAS ALL MOUNTS ON IT $1250
36.5x14x15 front cuts $100
2 SETS OF GRP 7.700 RODS $500 EACH SET
BBC hamburger oil pan alu. some dings & dents $200
4.600 BORE PISTONS AND RINGS (USED BUT PERFECT) $400
10 lb.nitrous bottle w/ -6 outlet (old style) 5 1/2" wide $100
power glide trans shield $75 ( no hardware)
DANA 30 HIGH PINION RING AND PINION (USED) $50
deadenbear electric shifter $75
autometer shift lights $50 each i have 2
5'' mallory tach w/ shift light and rev limiter $50
trans cables 3' and 5' new $25 each
power glide yolk w/ 12 tooth sprocket on it 1350 series $75
power glide standard valve body$100
deadenbear tail houseing for power glide $125
1.80 straight cut planitary set top of the line standard lenth $800
CALL BRENDAN AT 203-948-1204 ALSO 9INCH 3RD MEMBER W/ 40 SPLINE LIGHTWEIGHT MARK WILLIAMS SPOOL, 5.14 PRO GEAR SET WITH 6 PASSES ON THEM, STRANGE NODULAR IRON CASE, STRANGE BILLET PINION SUPPORT, MARK WILLIAMS CROMEOLY YOLK $800

pure fury · Joined: 16 Dec 2007 Posts: 172

pure fury wrote:

gary williams streched carb with sheetmetal plate $1250
MANY RATIOS OF PROFAB GEARS CALL
richmond dana 60 gears 5.38 -1 $100
2- pro stock cams & 1- nitros cam all roller $200
9 INCH FORD FRONT END 3.50 GEARS 13 PASSES ON FRONT END- DANA 44 OUTERS , MOSER AXELS,3RD MEMBER FROM RANDYS RING AND PINION HAS ALL MOUNTS ON IT $1250
36.5x14x15 front cuts $100
2 SETS OF GRP 7.700 RODS $500 EACH SET
BBC hamburger oil pan alu. some dings & dents $200
4.600 BORE PISTONS AND RINGS (USED BUT PERFECT) $400
10 lb.nitrous bottle w/ -6 outlet (old style) 5 1/2" wide $100
power glide trans shield $75 ( no hardware)
DANA 30 HIGH PINION RING AND PINION (USED) $50
deadenbear electric shifter $75
autometer shift lights $50 each i have 2
5'' mallory tach w/ shift light and rev limiter $50
trans cables 3' and 5' new $25 each
power glide yolk w/ 12 tooth sprocket on it 1350 series $75
power glide standard valve body$100
deadenbear tail houseing for power glide $125
1.80 straight cut planitary set top of the line standard lenth $800
CALL BRENDAN AT 203-948-1204

Rabbit · Joined: 28 Oct 2007 Posts: 238 Location: Augusta, Ga

Quote:

BBC hamburger oil pan alu. some dings & dents $200

Are the dings and dents from the inside going out or outside going in?? Confused

hmmm. may explain why rods and pistons and 10 lb.nitrous bottle w/ -6 outlet (old style) are for sale! lol. wet sump?

I sold this little motor and need some parts!!

_________________
http://myspace.com/rabbitmudracing

Rabbit
Scott Daniels.
Member #111. Super Stock

pure fury · Joined: 16 Dec 2007 Posts: 172

no this is off the blower motor. they are rocks off front tire dings.